deflexion

英

美

n.  偏斜，偏转

英英释义

noun

• a turning aside (of your course or attention or concern)
  1. a diversion from the main highway
  2. a digression into irrelevant details
  3. a deflection from his goal
  Synonym:diversiondeviationdigressiondeflectiondivagation
• the property of being bent or deflected
  Synonym:deflectionbending
• the movement of the pointer or pen of a measuring instrument from its zero position
  Synonym:deflection
• the amount by which a propagating wave is bent
  Synonym:deflectionrefraction

双语例句

• The research of closed loop tension measure system for deflexion loop
  偏转线圈绕线机闭环张力信号检测系统的研究
• It is suggested that fibre pulling out and interbedded crack deflexion are the major toughing mechanism in the asymmetrical FGM.
  HA（ZrO2）-316L不锈钢纤维FGM中，分析认为，增韧机理主要为纤维拔出增韧和层间裂纹偏转增韧。
• It compute the parameter of deflexion caused by thermal distortion in orbit, deduce the general expression for spreading beam after thermal distortion of reflector and the center deflexion of facula received in CCD.
  计算了在轨运行条件下反射镜面热变形引起的表面法向偏转参数，推导了镜面变形后出射光线的通用表达式以及镜面变形前后在CCD探测器上的接收光斑中心偏转量的计算表达式。
• Research of erect Crack about Deflexion Magnetic Core
  偏转磁芯竖裂问题的研究
• We gather a set of economically feasible technical criteria on linearity 、 squareness 、 deflexion 、 pitch and oscillation of sliding guide etc, and make the survey accuracy of the machine tool hit 63.2 μ m, and meet accuracy requirement.
  在各导轨的直线度、垂直度、导轨运动时的偏转、俯仰、摆动等方面得出了一组经济可行的技术指标，使机床的测量误差小于63.2μm，满足了精度要求。
• Comparative Research of Simulation on the Automatic Guidance System for Tractor and the Deflexion Guidance System for Machinery The Study on Position Measurement and Control System of Bias Unit in the Rotary Steerable Drilling Tool
  拖拉机自动导航与机具偏转导航的仿真对比研究指向式旋转导向钻具偏置机构位置测控系统的研究
• This paper discussing the mirror photo method and finding the solution deflexion of the plates through mirrir photo method under the concentrate force.
  本又讨论了映象法，并利用映象法求解了板在集中载荷作用下的挠度。
• The flow field of cutting comminution is simulated and analysed by computational fluid dynamics software FLUENT. From which we received the impeller form and deflexion angle of blade most in favor of cutting comminution, and proved that the high-speed cutting comminution have a economic rotational speed.
  利用流体分析软件FLUENT对切割粉碎流场建模，并在进行数值分析后，得到了最有利于切割粉碎的叶轮形式、刀片偏角，提出了高速切割粉碎设备粉碎物料存在一个经济转速。
• In the rupture process of the composite, crack deflexion, crystal evulsion, and rupture through crystal could be observed.
  渗透复合体在断裂过程中可见：裂纹偏转、晶体拔出和穿晶断裂。
• The principle of acoustooptic diffraction was introduced, and the experimental research was carried through about acoustooptic deflexion and modulation of Bragg diffraction.
  介绍了声光衍射的原理，并对布拉格衍射中的声光偏转和声光调制进行了实验研究。